Fire equipment: identifying needs and the documents to check
Detecting and responding are two separate matters. And an extinguisher is chosen on the nature of the risk.
Two matters are often confused: detecting a fire and acting on it. The first is detection and alarm; the second is first-response equipment. They are decided separately, then they complement each other.
Detecting: what appears first
A fire shows itself through smoke, heat or flame, and not in the same order depending on what is burning. A room where smoke builds up, a kitchen with constant steam and a plant room where the temperature normally rises do not call for the same type of detector. Describing the room and its activity is more useful than asking for “a detector”.
Warning: who must hear it, and where
A local sounder wakes people; a general alarm evacuates a building. State the floors, the zones and the noisy or isolated places. A signal that cannot be heard from the workshop is of no use.
Acting: the agent must match the risk
This is where a wrong choice is dangerous, not merely ineffective. Fires are classified by what is burning — solid materials, flammable liquids, gases, metals, cooking oils and fats — and each extinguishing agent suits only certain classes. Water on a fryer or on an electrical panel makes things worse.
So list, room by room: what is stored, what is used, and whether live equipment is present. The choice of agent follows from that list.
Documents to request, reference by reference
- The datasheet: fire classes covered, capacity, operating temperature range.
- The installation and use manual, in a language the people concerned can use.
- The conformity markings and references carried by the product, and the document attesting them for that precise reference — not for the range.
- The warranty terms and what they actually cover.
- Periodic inspection arrangements: who carries them out, how often, and what evidence they produce.
Safety equipment without its documents cannot be used in a file, even if it works.
What we do not do
We do not issue a certificate of conformity for an installation we did not carry out, and we display no standard without a document applicable to the reference concerned. The obligations specific to your premises — their nature, occupancy and classification — should be checked with the competent authority.